FIGURE B-5 shows the location of the service processor board LED.FIGURE B-4 shows the locations of the internal LEDs and the capacitor button on the CPU module.The Sun Fire X4600 server has internal status indicator LEDs for the CPU module, the CPUs and DIMM slots on the CPU module, and for the service processor board. LED is off - Fan tray is operating properly.On - server is in main power mode with AC power supplied to all components.Slow Blinking - An event that requires a service action has been detected.Left side orange - Link is established at 10 megabits.Left side LED green - Link is established at 100 megabits.Left side orange - Link is established at 10 or 100 megabits.Left side LED green - Link is established at 1 gigabit.Right side LED on (green) - Indicates link activity.LED is off - AC power to power supply is operating properly.ġ0/100/100 Gigabit Ethernet port LEDs (NET0 - NET3).LED is on (amber) - Power supply failed.Bottom LED (green) - Hard disk drive is operating properly.įIGURE B-2 Sun Fire X4600/X4600 M2 Server Back Panel LEDs.Middle LED (amber) - Hard disk drive failed.Top LED (blue) - reserved for future use.This LED lights when an upper temperature limit is detected. For CPU-related voltage errors, the associated CPU Fault LED will also be illuminated. Any voltage related event occurs in the system.To clear this condition either plug in the second power supply or remove it from the chassis.
On - Server is in main power mode with AC power supplied to all components.Blinking - Server is in standby power mode, with AC power applied to only the service processor board and the power supply fans.Off - Server main power and standby power are off.It also blinks when only one power supply is plugged in. Hold down the button for 5 seconds to initiate a "push-to-test" mode that illuminates all other LEDs both inside and outside of the chassis for 15 seconds.Push and release this button to make the Locate LED blink for 30 minutes.
#HARD DISK LED LIGHT FULL#
This LED helps you to identify which system in the rack you are working on in a rack full of servers. FIGURE B-3 and TABLE B-3 describe the fan tray LEDs.įIGURE B-1 Sun Fire X4600/X4600 M2 Server Front Panel LEDs.FIGURE B-2 and TABLE B-2 describe the back panel LEDs.FIGURE B-1 and TABLE B-1 describe the front panel LEDs.See the following figures and tables for information about the LEDs that are viewable on the outside of the server.
0 kommentar(er)
